Custom Harley Bagger Triple Trees | Raked Triple Trees
Custom Harley Bagger Triple Trees. Looking for raked triple trees to install on your custom motorcycle or bagger? In order to install a new triple tree on a custom Harley, the following will need to be done. The fuel tank will carefully need to be removed to avoid scratching or damaging it. The brake caliper, speedo, headlight, front fender, handlebars, wheel, and fork tubes will need to be taken off to get the triple tree off. The top nut and thin nut of the triple tree will be taken off in to remove the top triple tree while the lower triple tree is being supported. Next the bearing races, bottom bearing, and top bearing will need to come off to get to the fork tubes of the lower legs. The steering head will need to be cleaned on the inside while grease is applied to the top and bottom bearing race on the inside. An adaptor block will be placed at the base of the steering head while an installation tool is put in place. The installation tool will be used to guide the adaptor to the steering head and it will be tightened to 148 ft lbs. The upper triple tree will be lubricated and installed to the steering head then tightened. When the top tree is in the correct position, the large bolt will be taken off and parts and correct placement of the upper and lower tree will be inspected.
Extra oil on the bolt will need to be cleaned and loctite will be put on the large bolt to put back on the adaptor which will be tightened to 148 ft lbs. The cover of the bottom tree will need to be taken off before the lower triple tree and be put on the bike. The circlips will be taken off the shaft of the adaptor and a little grease will go on the shaft in order to install the bearing on the shaft. When this procedure is done it is important to not damage the bearing. The fork tubes will go back on which will need a little lube for easy installation while the clamping screws located on lower triple tree will be installed. The risers and the handlebars will be put on the bike and tightened to manufactures specs. The fender and caliper will but put on next while using spacers and hardware. Next the brake hose will be carefully put back on with the brake rotor spacer dividing the wheel spacer and axle. The front wheel goes on next with the aid of the wheel spacer and axle. One of the last steps of the process is mounting the headlight with the brackets provided while the last step will involve a test ride to ensure the job was done correctly. Harley Davidson Motorcycle models include but will not be limited to: Street Glide, Blackline Screaming Eagle, Breakout, Road Glide, Soft Tail, Road King, Ultra, Ultra Classic, Touring, Fat Boy, Electric Glide, and Blackline CVO.
Custom Bagger Triple Trees For Harley Street Glide
When looking for Harley Street Glide Triple Trees there are many options to choose from.
Custom Bagger Triple Trees For Harley Road Glide
Harley Road Glide Triple Trees come in different models to give your bike a great custom look.
Custom Bagger Triple Trees For Harley Road King
Harley Road King Triple Trees from an aftermarket parts dealer should fit into the stock fittings but in some cases custom work will have to be done.
Custom Bagger Triple Trees For Harley Touring
Harley Road Touring Triple Trees can be installed fairly easily to give your bike a great custom look
Custom Bagger Triple Trees For Harley Ultra
Harley Ultra Triple Trees are an affordable way to add flavor to your custom motorcycle.
Custom Motorcycle Triple Trees For Harley Ultra Classic
Harley Ultra Classic Triple Trees can make your bike stand out from the pack.
Custom Motorcycle Triple Trees For Harley Fat Boy
Harley Fat Boy Triple Trees gives your motorcycle a great look for bike shows.
Custom Motorcycle Triple Trees For Harley Soft Tail
Harley Soft Tail Triple Trees hides the axles for a really sharp look for your custom bike.
Custom Motorcycle Triple Trees For Harley Electric Glide
Harley Electric Glide Triple Trees sound really great when you are building a bagger.
Custom Motorcycle Triple Trees For Harley Breakout
Harley Breakout Triple Trees can be put on the motorcycles to add style to your custom motorcycle.
Custom Motorcycle Triple Trees For Harley Blackline Screaming Eagle
Harley Blackline Screaming Eagle Triple Trees can be installed quickly to give your bike a great custom look.
Custom Motorcycle Triple Trees For Harley Blackline CVO
Harley Blackline CVO Triple Trees can be installed to give your bike a nice clean look.