Custom Harley Bagger Nacelle | Custom Motorcycle Nacelle

Custom Harley Bagger Nacelles. Find the right Harley nacelle for your next custom bagger or motorcycle build. A nacelle on a custom Harley is needed when the bike has gone through a process of being raked which the headlight will be pointed up in the air instead of on the road. The part can be made out of hand laid fiberglass which will usually come ready to be painted and will be primed already. They are also a great way to dress your custom bagger up as the seamless headlight nacelle will get the attention your bike has been looking for. Depending on what company made the nacelle, it will fit the cowling spear, stock riser cover, and the headlight assembly in order to make an easy installation.

The first step to install a nacelle for a bagger is to cover the gas tank with a soft cloth that will not scratch up the paint. The handlebars and the risers will need to be removed then the two bolts that stock headlight will need to be taken off. The light bar that is on the bike will need to be folded down in order to take off the light switch and the hardware located on the back of the original headlight. When the outside housing of the headlight has been taken off, the original headlight of the bike will be ready to be disconnected. The light will need to be unscrewed from the mounting block while the screw located in the front of the headlight will need to be undone. The trim ring will need to come off along with the lamp of the headlight. The wiring harness will need to be disconnected from the light while splicing will need to be done to the new harness as the original headlight harness will be discarded. The new connector will be installed and the bucket from the original headlight will be taken off.

With the original headlight assembly off the bike the new nacelle can be placed on the front end. There will be predrilled holes and they should fit the stock holes, but if they do not fit drilling a slightly bigger hole will be needed. The spacers will go in the middle of the fork leg and the new stretched nacelle in order to alleviate the nacelle from getting compressed when installing OEM mounting bolts. The original light bar can be used or you can choose an aftermarket light bar. If the OEM light bar is used modifications will be needed by cutting the middle of the bar which will end up getting a light bar sleeve. The spot light bar will put on one side in order to put the light bar sleeve on. The other side can now be done with the light bar sleeve being installed. When all of these pieces are put together it will be tightened in which the headlight assembly will be ready to put on while the new harness is soldered. The headlight bucket and lamp can be installed while the headlight trim ring will go on last. Depending on if you had the nacelle painted before the installation the last thing to do is install the handlebars and risers then take the bagger out for a test ride. Harley Davidson Motorcycle models include but will not be limited to: Street Glide, Blackline Screaming Eagle, Breakout, Road Glide, Soft Tail, Road King, Ultra, Ultra Classic, Touring, Fat Boy, Electric Glide, and Blackline CVO.

Custom Bagger Nacelle For Harley Street Glide
When looking for Harley Street Glide Nacelle there are many options to choose from.

Custom Bagger Nacelle For Harley Road Glide
Harley Road Glide Nacelle comes in different models to give your bike a great custom look.

Custom Bagger Nacelle For Harley Road King
Harley Road King Nacelle from an aftermarket parts dealer should fit into the stock fittings but in some cases custom work will have to be done.

Custom Bagger Nacelle For Harley Touring
Harley Road Touring Nacelle can be installed fairly easily to give your bike a great custom look

Custom Motorcycle Nacelle For Harley Ultra
Harley Ultra Nacelles are an affordable way to add flavor to your custom motorcycle.

Custom Motorcycle Nacelle For Harley Ultra

Custom Motorcycle Nacelle For Harley Ultra Classic
Harley Ultra Classic Nacelle can make your bike stand out from the pack.

Custom Motorcycle Nacelle For Harley Fat Boy
Harley Fat Boy Nacelle gives your motorcycle a great look for bike shows.

Custom Motorcycle Nacelle For Harley Soft Tail
Harley Soft Tail Nacelle hides the axles for a really sharp look for your custom bike.

Custom Motorcycle Nacelle For Harley Electric Glide
Harley Electric Glide Nacelle sound really great when you are building a bagger.

Custom Motorcycle Nacelle For Harley Breakout
Harley Breakout Nacelle can be put on the motorcycles to add style to your custom motorcycle.

Custom Motorcycle Nacelle For Harley Blackline Screaming Eagle
Harley Blackline Screaming Eagle Nacelle can be installed quickly to give your bike a great custom look.

Custom Motorcycle Nacelle For Harley Blackline CVO
Harley Blackline CVO Nacelle can be installed to give your bike a nice clean look.